Search results for "discharge measurements."
showing 9 items of 9 documents
Critical issues in the PD testing methodology for XLPE-insulated MV cables: An experimental case
2017
This paper describes some critical issues arising during the partial discharge (PD) testing of a 500m delivery length of an XLPE-insulated MV cable. At first, conventional PD measurements were performed on the whole length by using a standard acquisition system; PDs activity was detected, but the system allowed the operator to localize the PDs only on a length of 70 m. A visual inspection of this section highlighted the presence of an excoriation in the outer sheet. Aiming at a more accurate pin-pointing of the defect, more measurements were carried out in the proximity of the outer defect using a portable PD detection system. These measurements showed PDs activity, whose source was located…
New Theoretical Solution of Stage-Discharge Relationship for Slit Weirs
2018
In this paper, the flow-process of a slit weir was analyzed on the basis of a theorem of dimensional analysis and incomplete selfsimilarity theory. The theoretically deduced stage-discharge formula then was calibrated using experimental data obtained for a ratio between the weir and the channel width, ranging from 0.05 to 0.25. The deduced stage-discharge relationship allowed measuring discharge values characterized by errors that, for 98% of the measured values, were less than or equal to 5%. The performance of the proposed theoreticalstage-discharge formula also was improved by introducing the Reynolds number (for 98.5% of the measured values the error was less than or equal to 5%, and th…
Time Evolution of Partial Discharges in a Dielectric Subjected to the DC Periodic Voltage
2022
Partial discharge (PD) detection can be considered one of the most useful tools for assessing the insulation conditions of the power apparatus in high-voltage systems. Under AC conditions, this analysis is widely employed in online and offline tests, such as type tests or commissioning, and can be carried out by applying the phase-resolved PD (PRPD) method, since the patterns can give information about the defect classification. Under DC voltages, the classic pattern recognition method cannot be performed, and the measurements show complexities related to the nature of the phenomena. For this reason, to date, a standard for PD measurements under DC does not exist. In previous papers, a new …
Field Testing of a Simple Flume (SMBF) for Flow Measurement in Open Channels
2008
In this paper the stage–discharge relationship of a new flume named SMBF (Samani, Magallanex, Baiamonte, Ferro), originally proposed by Samani and Magallanez and tested by Baiamonte and Ferro, for measuring flow discharge in open channels is reviewed. The flume is obtained inserting two semicylinders in a rectangular cross section. The results of some experimental runs carried out using horizontal flumes characterized by different values of the contraction ratio (ranging from 0.17 to 0.81) are used for determining the two coefficients of the power stage–discharge equation. The stage–discharge equation is tested using flow measurements carried out in the period between December 2004 and Marc…
FIELD TESTING OF THE SMBF FLUME
2007
At first, in this paper the stage-discharge relationship of a new flume, originally proposed by Samani and Magallanez, for measuring flow discharge in open channels is reviewed. The flume is obtained inserting two semicylinders in a rectangular cross-section. Then, the results of some experimental runs carried out using horizontal flumes characterized by different values of the contraction ratio (ranging from 0.17 to 0.81) are used for determining the two coefficients of the power stage-discharge equation. Finally, the stage-discharge equation is tested using flow measurements carried out, in the period December 2004 – March 2006 in the Sicilian experimental SPA1 and SPA2 basins. Field test…
New Stage-Discharge Equation for the SMBF Flume
2016
AbstractFlumes for indirect discharge measurements are widespread and are characterized by a particular shape of the cross section area with various degrees of convergence and subsequent divergence. The flume named Samani, Magallanez, Baiamonte, Ferro (SMBF) is a simple and inexpensive instrument and its channel contraction is obtained by applying two semicylinders to the walls of a rectangular cross section. At first, in this paper a new stage-discharge equation for the SMBF flume is theoretically deduced. Then, this equation is experimentally calibrated using the laboratory measurements from the literature for different values of the contraction ratio. Finally the field measurements carri…
A combined CWT-DWT method using model-based design simulator for partial discharges online detection
2009
The suppression of noises is fundamental in onsite Partial Discharge (PD) measurements. For this purpose, the wavelet transform analysis method has been developed and it is a powerful tool for processing the transient and suddenly changing signals. As the wavelet transform possesses the properties of multi-scale analysis and time-frequency domain localization, it is also particularly suitable to process the suddenly changing signals of the partial discharge pulse (PD). In this paper, an improved Wavelet denoising method developed by a model-based design software is presented. Simulations are provided as well as some results obtained during laboratory experiment and on-line PD measurements. …
Complex Rating Curves for Sharp Crested Orifices and Rectangular or Triangular Weirs under Unsteady Flow Conditions
2021
The importance of discharge measurements is fully acknowledged in many research fields, mostly in hydrology. Numerous measurement devices and various overflow structures have been proposed for discharge measurements; however, their use is based on calibrated simple stage discharge relationships that may cause significant errors when unsteady flow conditions occur. This issue is quite common because of rainfall and runoff temporal variability that inhibits the achievement of the steady state. Although this issue has already been experimentally investigated, it seems that a physically based line of approach has not been attempted before. In this paper, unsteady stage discharge relationships o…
Deducing the stage-discharge relationship for contracted weirs by the outflow theory of Malcherek
2019
The aim of this paper was the deduction of a new stage-discharge relationship for a contracted weir, having a crest length less than the channel width, by using the Malcherek’s outflow theory. The average outflow velocity over the rectangular contracted weir was expressed in terms of the head over weir, the momentum correction coefficient and the ratio between the crest length and the channel width. This theoretically deduced stage-discharge formula was calibrated by measurements carried out for values of the ratio between the crest length and the channel width ranging from 0.3125 to 0.9375. In particular, a relationship to estimate the momentum correction coefficient for contracted weirs w…